Odin 200W Box Mod By Vaperz Cloud x Dovpo x The Vaping Bogan

The new Odin 200w box mod is a collaboration created by dovpo, vaperz cloud and youtube reviewer, the vaping bogan. this game changing regulated device harnesses the power of dual 21700 batteries and the intuitive proprietary dovpo chip to bring you better battery life, an intelligent interface and up to 200w of power. With room to accomodate up to 30mm atomizers you won't have to compromise of your setup and its bottom loading battery door adds to its convinience and fuss-free aesthetic.

• Aluminum alloy + zinc alloy construction
• Power range: 5-200W
• Temperature range: 200-600'F(100-315'C)
• Display: 0.96" OLED
• Output voltage: 0.8-12V
• Resistance: 0.08-3.5ohm
• Battery: 2*21700 high-drain battery (battery sold separately)
• Charging: USB Type-C 5V/2A
• Gold-plated spring loaeded 510 pin
  
  
  

Each set contain:
1pc Dovpo Odin 200 Mod
6pc Battery wraps
2pc 18650 battery adaptors
1pc USB type C Cable
1pc User manual

THC Tauren Max RDTA

The new THC Tauren Max RDTA features an innovative 3D blower system with two independent channels and a unique deck. The device provides for the possibility of increasing the volume of the tank from 2 to 4.5 ml. As always, you will receive a stylish case and a branded tube for storing and carrying the product as a gift from the manufacturer.

The metal parts of the atomizer are made of high-strength stainless steel, drip type 810 is molded from heat-resistant Resin polymer, both flasks are made of thick glass. The top cap, which has a grooved knurling for ease of rotation, is responsible for adjusting the side airflow. The Tauren Max skirt is perforated on opposite sides by two groups of air intake openings, under it there is a removable ring for adjusting the lower airflow.

The base with the original Y-shaped stands is designed for two powerful spirals, and four wide grooves are made for laying the cotton wool. The tank is filled with a squonk pin or two holes on the deck, which overlap with the protrusions on the skirt, which also facilitates the unscrewing of the atomizer.

Features:

• Innovative blowing system. At THC Tauren Max RDTA, air is supplied to the coils from three sides, providing excellent taste and bulk. In this case, two independent channels are involved, the lateral and lower ones, which are regulated separately up to complete overlap.
• Simple service. The spirals are installed in the Y-shaped racks with their legs up, which makes it possible to remove excess wire after fixing with maximum convenience. In addition, this positioning eliminates the closure of the long residues of the legs on the body.

Specifications:

• Size: 25 x 41 mm
• Connector: 510
• 810 drip tip
• Double adjustable airflow
• Volume: 2 / 4.5 ml
• Installation of two spirals
• Fixing spirals with legs up
• Squonk compatible

Equipment:

• 1 x THC Tauren Max RDTA
• 1 x Squonk Pin
• 1 x Allen key
• 1 x 2 ml glass
• 1 x 4.5 ml glass
• 1 x Aluminum Tube Stand
• 1 x Squonch Extension
• Spare parts
• Instruction manual

VOOPOO VINCI AIR Pod Kit

The VOOPOO VINCI AIR Pod Kit implementing a 900mAh battery, dual operation modes, and can hold up to 4mL of eJuice within the refillable pod. Equipped with the same dual airflow system, the 4mL pod can be rotated 180° for an entirely different inhalation style. Constructed from zinc-alloy, the VINCI AIR houses a 900mAh battery internally, delivering ample power to support the 30W max output. Outputting in AUTO or MANUAL Mode, the VOOPOO VINCI AIR can intelligently detect the ideal wattage for the installed coil or can allow the user to adjust the wattage to the preferred setting.

Features:
Gene.AI Chipset
Dimensions - 100.9mm by 27mm by 18mm
Integrated 900mAh Rechargeable Battery
Wattage Output Range: 5-30W
Voltage Output Range: 3.2-4.2V
Resistance Range: 0.45ohm-3.0ohm
AUTO MODE - Intelligent Coil Recognition
MANUAL MODE
Zinc-Alloy Chassis Construction
Single Firing Button
Mode Adjustment Button
4mL Refillable VINCI Pod
Side Fill System - Silicone Stoppered
0.6ohm PnP-VM4 Mesh Coil - rated for 20-28W
1.0ohm PnP-R2 Regular Coil - rated for 10-15W
Plug 'n' Play Coil Installation
Compatible with Several PnP Coils
Dual Airflow System - Rotate Pod 180° for MTL or DL Options
Magnetic Pod Connection
Overtime Protection
Short-Circuit Protection
Overcharge Protection
Output Over Current Protection
Over Discharge Protection
Over Temperature Protection
Max Power Protection
MicroUSB Port

Includes:
1 VINCI AIR Device
1 VINCI AIR Pod(4ml)
1 0.6ohm PnP-VM4 Coil
1 1.0ohm PnP-R2 Coil
1 USB Cable
1 Warranty Card
1 User Manual
1 GENE CHIP Card

Steam Crave Aromamizer Plus V2 RDTA(Advanced Kit)

Steam Crave introduces their newest Aromamizer Plus V2 RDTA, a 30mm diameter tank, high quality and great looking with the 810 resin drip tip.postless build deck system for dual coils,and the package comes with a new mesh deck. Two conversion kits are included for users who may want a smaller or larger capacity; 8ml or 16ml.a threaded top fill system,Smoother airflow from restrictive DL to airy DL,Better airflow adjustment in lower wattage 30-200W, better performance than original Plus,Faster and more accurate juice flow control,Better for cold weather or high power vaping.

Dimensions
Length:41.60mm(RDA)
Length:51.50mm(RDTA 8ml)
Length:71.00mm(RDTA 16ml)
Diameter:30.00mm

PACKAGE CONTENTS
1xAromamizer Plus V2 Tank
1x8ml extension tube
1x16ml extension tube
2x6mm chimney reduction
1xMesh deck
1xSpare parts
1xTool
1xUser Manual

Steam Crave Aromamizer Plus Mesh Deck

The Steam Crave Aromamizer Plus Mesh Deck is for the Aromamizer Plus RDTA and new Aromamizer Plus V2 RDTA. This self-winding deck is specially designed for use with mesh windings. The deck is 30 mm in diameter and has large clamps for attaching the mesh strip. The clamps are simply screwed on and off and the mesh clamped accordingly. The cotton is then pulled through the mesh and placed in the large pockets. A BF / Squonkpin is included for even greater variability. The Aromamizer can also be used as a Squonk RDA. The large number of separate decks and the BF / Squonkpin extension make the Aromamizer Plus one of the most versatile vaporizers currently available on the market.

Features:

• new self-winding deck, specially designed for use with mesh windings
• high quality materials and easy handling
• 30 mm diameter
• BF / Squonkpin
• large clamps for attaching the mesh strip
• 2 square straw strips with 0.18 ohm resistance included

PACKAGE CONTENTS

• 1x Steam Crave Aromamizer Plus RDTA Mesh Deck
• 1x Steam Crave Squonk / BF Pin for use as a dripper
• 2x Kanthal mesh strips 0.18 ohm
• 4x replacement springs for the terminals
• 2x spare screws
• 1x auxiliary tool
• 1x instructions

Asmodus Minikin Kodama Dual 21700 180w Box Mod

The asMODus Minikin Kodama 21700 180w box Mod is Asmodus' twist and take on the what a dual 21700 mod should be; beautiful, refined, and powerful. Utilizing 21700 Li-ion cell batteries, an easy-to-use interface, and an advanced chipset, the Minikin 21700 Kodama box mod will leave a mark in history. Comfortable for any user, the Minikin 21700 Kodama will fit perfectly in any user's hand with its triangular shape that is contoured to make you feel like you're holding the most luxurious device the user has ever held. Passed down previous Kodama mods, the battery door is loaded from the bottom held by a hinged stainless steel door. Touch screens can be aggravating to deal with sometimes, so Asmodus swapped to physical buttons to bring a nice tactile experience giving a nostalgic feeling to the user. Just like their other devices such as the asMODus Lustro, the modes can be swapped with a simple combination of button presses: Hold wattage up then pressing the firing button will scroll up to the next mode and holding the wattage down button then pressing the fire button will scroll down to the next mode. With the simple press of the fire button 5x, the Minikin 21700 has the ability to change brightness, check resistance, set screen timer, change the colour of the screen, and check how many puffs the user has taken. Capable of outputting 180w in VW and wattage curve modes and 120w in temperature control modes, the asMODus Minikin 21700 sports a more advanced version of the Minikin 2 chipset, the GX-180tc-2, that brings with it a high definition colour screen as well as our high power efficiency technology. 

As you would expect from any vape mod from asMODus, the Minikin Kodama 21700 features their industry-leading curve mode, which allows for complete control over the firing cycle thanks to the ability to program not just wattage levels, but also time increments. Just as with the Minikin 3 and Minikin 2 Kodama colour edition, the user is able to select from six different display accent colours in order to make the Minikin Kodama 21700 truly their own, while the ability to update the box mod's firmware via a Micro USB cable ensures your mod is always up to date. A stab wood vape mod sure to be the crown jewel in your collection, the asMODus Minikin 21700 Kodama offers the capacity that comes with 21700 Li-ion cells while at the same time delivering an incredibly ergonomic design and intuitive operation, making for the most impressive Kodama device yet.

Features

GX-180TC-2 chipset

Powered by a married pair of high-drain 21700 Li-ion cells (not included)

Power output range: 5-180W (VW/Curve) / 5-120W (TC/TCR/TFR)

Temp control range: 212-572ºF/100-300ºC

Maximum voltage output: 7.5V

Maximum current output: 35.0A

Atomizer resistance range: 0.1-3.0Ω

Variable wattage, wattage curve, TC, TFR, and TCR functionality

TC support for Ni200 nickel, titanium, SS304, SS316, and SS317 heating elements

Stabilized wood and resin chassis

0.96" HD full colour display

ECO/Stealth mode

Firmware update support

Reverse polarity, short-circuit, low-voltage, overcharge, no-load, low resistance, high resistance, overtime, and overheat protection

Micro USB firmware update port

Stainless steel 510 connection

Gold plated 510 pin

Dovpo Mono SQ DNA75C Box Mod

The Dovpo Mono SQ DNA75C Box Mod features a wattage range of 1-75W, 0.96" TFT Color Display, and is equipped with an extensive temperature control suite. Constructed from durable aluminium alloy, the chassis of the mono SQ Mod can accept a single 18650 battery, sold separately, and is installed behind the magnetic chassis panels. In addition the single 18650 battery powers the Evolv DNA75C Chipset within, allowing for a wattage range of 1-75W, while maintaining plenty of safeties and protections. Featuring an ergonomic grip, the mono SQ feels nice in hand and can be utilized with any 510 threaded connection tank available on the vaping market segment.

Features:

Evolv DNA75C Chipset
Dimensions - 87mm by 41.1mm by 27mm
Single High-Amp 18650 Battery - Sold Separately
Wattage Output Range: 1-75W
Voltage Output Range:
Temperature Range: 93°-316°C / 200°-600°F
Aluminium Alloy Chassis Construction
Intuitive Firing Button
0.96"" TFT Color Display Screen
Two Adjustment Buttons - Selection Button
Replay Feature
Magnetic Chassis Panels
Check Atomizer Protection
Short Circuit Protection
Weak Battery Protection
Temperature Protection
Resistance Protection
510 Threaded Connection
MicroUSB Port

Includes:
1 Dovpo mono SQ Box Mod
1 MicroUSB Cable
1 User Manuals

Dovpo Clutch Mech Mod By Signature Tips & Mike Vapes

Check out the newest Dovpo Clutch Mech Mod,made in collaboration with Signature Tips & Mike Vapes,a high quality mechanical mod is machined from Billet Aluminum, features a hybrid 510 connection, solid silver contacts and a commercial grade 3D printed internal sled. Powered by a single 21700 battery (not included).

Features

Solid Silver Contact Points
Anodised With Serial Number
Solid Billet Aluminium Construction
Unique Fire Button Locking System
Commercial Grade 3D Printed Sled
Requires (1) High Amp 21700 Battery
Hybrid 510 Connection
Magnetic Doors (16 magnets in total)
Dimensions: 79.5mm x 35mm x 27mm

Each set contain:
1pc Clutch Mod
1pc Warranty card
1pc Tool set and spare screws

Hellvape Destiny RTA By Alex Vapers MD

The newest Hellvape Destiny RTA is made in collaboration with Youtube Alex Vapers MD, comes with 24mm diameter and 4ml capacity. Hellvape Destiny features smart angled post design, easy to build single coil and cut coil legs. Destiny RTA adopts adjustable bottom dual airflow system with knurled grip to adjust simply. Multiple tube material for option: glass/Ultem/PCTG tube.

Features:
Smart angled post design, single coil building and coil legs cutting easily
Generous build space and post holes
Adjustable bottom dual airflow system with knurled grip
Top filling design
Multiple tube material for option: glass/ultem/PCTG

PACKAGE CONTENTS:
1* Destiny RDA
1* Bubble glass tube
1* 510 adapter
1* Prebuilt coil 0.37ohm
1* Accessory bag
1* Shoelace cotton
1* User manual

Smok Nord 2 40w Pod System Kit

The Smok Nord 2 40w Pod System Kit is a versatile pod system equipped with a 1500mAh battery, adjustable 1-40W max output, and comes with a NORD and RPM pod to support the respective coil options offered by SMOK. Upgrading many of the previous features, the Nord 2 Pod System can hold up to 4.5mL of eJuice within the refillable pod. Sold with two pods, the Nord 2 can support coils from both the Nord and RPM Coil Lines, accepted into the respective pod in a plug 'n' play manner for quick and easy installs or coil changes. In addition, the NORD 2 Kit maintains the same single button layout, adding a 0.69" OLED display screen to relay the wattage output and battery life, adjusting the wattage with the single firing button. With improved readability and upgrades to the useful original features, makes the SMOK NORD 2 Kit a fine successor to the classic Nord Pod System we all fell in love with.

Features:

Proprietary Intelligent Chipset
Dimensions - 95mm by 30.5mm by 20mm
Integrated 1500mAh Rechargeable Battery
Wattage Output Range: 1-40W
Voltage Output Range: 0.5V-4.0V
Resistance Range: 0.3-3.0ohm
Zinc-Alloy Chassis Construction
Single Button Operation - Firing & Wattage Adjustment
0.69"" OLED Display Screen
4.5mL NORD Pod - Supports NORD Coils
4.5mL RPM Pod - Supports RPM Coils
Ergonomic Mouthpiece
Side Fill System - Silicone Stoppered
SMOK Nord & RPM Coil Series
0.4ohm RPM Mesh Coil
0.8ohm Nord DC MTL Coil
Plug 'n' Play Coil Installation
Magnetic Pod Connection
Pod Detection
Short-Circuit Protection
8 Seconds Cut-Off
Low Voltage Protection
MicroUSB Port

Includes:
1 Nord 2 Device
1 Nord 2 RPM Pod
1 Nord 2 Nord Pod
1 0.4ohm RPM Mesh Coil
1 0.8ohm Nord DC MTL Coil
1 MicroUSB Cable
1 User Manual