Kanger Unitank Clearomizer

Introduction:

Kanger Unitank is combination of atomizer, tank, and metal tube which can be replace and unscrew anytime very easily. It has same functionality as other Universal Kanger Tanks so it can be compatible with 510 threaded MOD without any adapter. It is also filled from top you just have to be careful that liquid may not drip in to the metal tube. Unitank consists of two chambers top and bottom when cap is removed the spring pop up and prevent the lower chamber by blocking airflow holes and liquid to drip out.  The atomizer head is placed in bottom chamber.

Kanger Unitank Clearomizer

Features:

Just like Nova Tank it is also filled from the top

Atomizer can be change if break and also replace with Protank-1 and Protank-2

Unitank has coil at bottom

Tank is made of Poly Carbonate

Unitank has 2.5ml ejuice capacity

Unitank is compatible with 510 thread MOD/APV without adapter

Dimensions: 2-3/4"L x 3/4"D (with drip tip)

Tips:

There is a metal tube placed at the center of clearomizer from battery end to mouthpiece, sometimes liquid goes in while filling the tank so, make sure no liquid drip in while filling.

When you notice a gurgling noise or liquid came out it means that liquid approaches inside the metal tube simple take it off and rub with cotton cloth or tissue also wrap battery with cloth or tissue before you remove the clearomizer.

When unscrewing the tube from base the atomizer head of the Unitank can unfasten. Always secure the atomizer head before you start installation of the base of the Unitank.

When you wish to charge the battery have a look at battery contact are you might found little quantity of liquid clean it before you start the battery charging it will prevent battery from uncertain damages.